Copyright © Fusion Group Holdings Pty 2015
Telephone: +07 3393 5770 sales@fusionplast.com.au
Ground source heat pump systems work by exchanging heat with the ground to provide an efficient and environmentally friendly way of heating and cooling buildings. The polyethylene pipes in the ground can be used to gain heat in the winter and to release excess heat in the summer - a sustainable and cost-effective alternative to standard air conditioning. Through our relationship with Peak Pipe Systems, a Fusion Group company, FusionPlast can supply everything needed to take a ground source heat project from specification to implementation. Our services can range from a simple one-off design for a manifold or chamber to large-scale projects covering consultancy, system design, fabrication, equipment hire, installation, management of joint data and operator training. On the manufacturing side, Peak Pipe extrudes pipe, assembles ground loops, manufactures electrofusion fittings, builds control boxes and fabricates manifolds and chambers. Peak Pipe ground loops are available in the following specifications: ·         Extruded from virgin PE100 polymer ·         82m, 102m, 127m and 152m lengths as standard and other configurations to order ·         32mm or 40mm diameter SDR11 pipe ·         Depth marked every meter ·         Dual wound to ease installation Peak Pipe manifolds are available to the following specifications: ·         Two to 12 outlet manifolds ·         Designed for optimum flow control and hydraulic performance ·         Quality ball valves and flow meters fitted as standard ·         3-D design capabilities for bespoke manifold configurations ·         A complete range of chambers to accommodate standard and bespoke manifolds
Telephone: +07 3393 5770 sales@fusionplast.com.au
Ground source heat pump systems work by exchanging heat with the ground to provide an efficient and environmentally friendly way of heating and cooling buildings. The polyethylene pipes in the ground can be used to gain heat in the winter and to release excess heat in the summer - a sustainable and cost-effective alternative to standard air conditioning. Through our relationship with Peak Pipe Systems, a Fusion Group company, FusionPlast can supply everything needed to take a ground source heat project from specification to implementation. Our services can range from a simple one-off design for a manifold or chamber to large-scale projects covering consultancy, system design, fabrication, equipment hire, installation, management of joint data and operator training. On the manufacturing side, Peak Pipe extrudes pipe, assembles ground loops, manufactures electrofusion fittings, builds control boxes and fabricates manifolds and chambers. Peak Pipe ground loops are available in the following specifications: ·         Extruded from virgin PE100 polymer ·         82m, 102m, 127m and 152m lengths as standard and other configurations to order ·         32mm or 40mm diameter SDR11 pipe ·         Depth marked every meter ·         Dual wound to ease installation Peak Pipe manifolds are available to the following specifications: ·         Two to 12 outlet manifolds ·         Designed for optimum flow control and hydraulic performance ·         Quality ball valves and flow meters fitted as standard ·         3-D design capabilities for bespoke manifold configurations ·         A complete range of chambers to accommodate standard and bespoke manifolds
Site Index
Enabling the world’s water and energy
Downloads